Products

Centrifugal fans

The centrifugal fan can be considered the most popular and widely used type of industrial fan. It can be generally classified into four main categories: backward-curved centrifugal fans, forward-curved centrifugal fans, radial centrifugal fans, and airfoil centrifugal fans. In this article, we have introduced each of these models, along with their features and applications.

In this type of industrial fan, air moves from the impeller section toward the blades, where its kinetic energy increases. This kinetic energy is converted into pressure energy before entering the discharge section, resulting in a rise in air pressure. Centrifugal fans are suitable for flows containing particulates (moisture and dust), for material conveying, and also for high-temperature systems.

A large number of fans and blowers used in high-pressure applications are of the centrifugal type. Figure 1 shows a typical centrifugal fan arrangement. The impeller may be directly mounted on the shaft or separately supported with two additional bearings. Another configuration, commonly used in large blowers, employs a flexible coupling connection.

Air or fluid enters axially into the impeller through an internal nozzle, which imparts a slight acceleration to the air at the impeller inlet.

The impeller functions by spinning the fluid from a smaller radius to a larger one, directing it toward the casing at high pressure and velocity. Therefore, unlike axial fans, the energy input in centrifugal fans also contributes to pressure rise. The flow path within the impeller is spiral or volute-shaped. The impeller guides the fluid out of the fan. In addition, the volute casing helps increase the fluid pressure. The outlet passage may also be shaped with a diffuser.

[Image]

These fans are capable of generating high pressures with excellent efficiency and are compatible with most process conditions, which is one of their major advantages. Centrifugal industrial fans are categorized based on blade type into the following groups:

- Airfoil blades

- Backward-curve

- Backward-inclined

- Radial-tip

- Forward-curved

Centrifugal fans with airfoil blades offer the highest operating efficiency and the lowest noise levels among all types of centrifugal fans.

BC fans have lower efficiency compared to airfoil fans but are capable of handling gases containing particulates. If the concentration of solids in the gas is high, radial-bladed or radial-tip fans are more suitable.

FC fans, compared to BC fans of the same size, produce lower airflow but higher pressure, with lower efficiency. Forward-curved fans are used where space constraints are important. RB fans have low efficiency but are simpler in construction and allow for cleaning during operation.

Different Models of Centrifugal Fans

In general, centrifugal fans can be classified into four main categories based on the type and shape of their blades. Each of these models offers specific performance characteristics and delivers maximum efficiency for particular applications.

Airfoil Centrifugal Fan

The airfoil centrifugal fan is one of the most efficient types of centrifugal fans, designed with blades that have an airfoil cross-section similar to that of an airplane wing. This aerodynamic design significantly reduces turbulence and drag, resulting in higher efficiency and lower noise levels compared to other centrifugal fan types.

These fans are ideal for applications requiring high airflow at moderate to high pressures, such as in HVAC systems, industrial ventilation, cleanrooms, and paint spray booths. However, due to their blade design, they are not suitable for handling dusty or particulate-laden air, as the sharp edges and close clearances can lead to erosion or buildup.

Key features:

Highest efficiency among centrifugal fans

Low noise emission

Smooth and stable airflow

Best suited for clean air applications

Forward-Curved Centrifugal Fan

The forward-curved centrifugal fan is designed with blades that curve in the direction of rotation, which allows it to generate high pressure at relatively low speeds. These fans are known for their compact size and ability to move large volumes of air against higher resistance, making them a popular choice for applications where space is limited.

However, forward-curved fans have lower efficiency compared to backward-curved or airfoil fans, and they are more sensitive to system resistance changes. They are best suited for clean air applications with low particulate content, such as residential HVAC systems, light commercial ventilation, and air handling units.

Key features:

High pressure at low rotational speeds

Compact design, ideal for space-constrained installations

Suitable for clean air environments

Lower efficiency compared to other centrifugal types

Backward-Curved Centrifugal Fan

The backward-curved centrifugal fan features blades that curve away from the direction of rotation. This design offers high efficiency and stable performance across a wide range of operating conditions. These fans are less prone to overloading because the power consumption decreases as the airflow increases, making them highly reliable for continuous operation.

Backward-curved fans are suitable for handling moderate to high airflow at medium to high pressures and can tolerate some level of dust or particulate matter, depending on the blade configuration. They are widely used in industrial ventilation, dust collection systems, HVAC applications, and process air supply systems.

Key features:

High efficiency over a broad operating range

Non-overloading power characteristic

Capable of handling air with light dust or particulates

Suitable for both industrial and commercial applications

Radial Centrifugal Fan

Although a radial fan does not move a very large volume of air, it moves that same volume at a high pressure, and one of the reasons for this is their high rotational speed.

Source:

Pelonis Technologies – "Centrifugal Fan vs. Axial Fan"

Available at: https://www.pelonistechnologies.com/blog/axial-vs.-centrifugal-fans

Source 2:

Dynamic Fan – "What Is a Centrifugal Fan Used For?"

Available at: https://www.dynamicfan.com/what-is-a-centrifugal-fan-used-for/

Related Products

Related Projects